Holding the bottle about two inches away from soiled jewelry, spray SparkleSparkle™ directly on the soiled areas.

Holding the jewelry firmly, spray into the setting to coat the underside of gemstones.

Allow SparkleSparkle™ to work 25-30 seconds while it gently removes surface contaminants.

Use a SparkleSparkle™ GemBrush to gently loosen persistent soil, or heavy contamination on the backside of gemstones.

Rinse jewelry by swishing it in a cup or small bowl of warm water.

Spray SparkleSparkle™ on heavily soiled jewelry - concentrating the spray where the jewelry is most soiled.

Gently holding the GemBrush, aim the flexible and non-abrasive micro-tip brush to where the most contamination / soil is located. Slowly twist the brush with a slight back-and-forth motion.

Let the super soft bristles and SparkleSparkle™ do the work. There is no need to apply more than very light pressure.

Persistent or very soiled jewelry may require one or more applications of SparkleSparkle. Repeat the above process as necessary.

We do not recommend soaking jewelry in SparkleSparkle. Unlike other cleaners, SparkleSparkle™ works best with the gentle agitation from spraying.

After cleaning jewelry with SparkleSparkle™ and rinsing in warm water, use a SparkleSparkle™ GemCloth to quickly wick away moisture from gemstones and precious metal settings.

Gently pat pearls and delicate jewelry dry using the SparkleSparkle™ GemCloth.

For extra sparkle in platinum, gold, and silver jewelry, spray a little SparkleSparkle™ into the GemCloth and gently massage the precious metal to a brilliant shine.